|
|
|
FIRESTIK K-4ADD
FIRESTIK K-4ADD
Attractive mounts for trunk and roof applications. Includes two 21/2" circular discs (stainless steel top disc), mounting stud
and a rubber gasket to protect vehicle finish. The K-4DD model has a low underside profile for confined space installs.
Requires a 1/2" hole and flat surface for installation
SKU Number:K-4ADD
|
|
|
|
|
|
|
FIRESTIK K-64A
FIRESTIK K-64A
These are the stainless steel versions of our most popular mounts! The mounting clamp can be positioned horizonatally for
horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the
angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motorhome. The SS-64 is
complete with our heavy-duty K-4 stud mount with ring terminal connections. The SS-64A model has our world famous
K-4A stud mount with screw on coaxial termination. All models come complete with stainless steel mounting hardware. These
mounts are also available in a less costly chrome plated version. Use one of the 3-Way Mounting Brackets for single or dual
antenna installation on your car, truck, van, motorcycle or motorhome. If a strong structure is available, these mounts will
easily support antennas up to 5' (1.5m) in length. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high.
With the stud in place, the over all height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm).
SKU Number:K-64A
|
|
|
|
|
|
|
FIRESTIK MK-294R
FIRESTIK MINI-KIT STAKE-HOLE MOUNT & 18FT COAX MOBLE: MK-294R: FOR SINGLE STAKE - HOLE ANTENNA INSTALLS.
USE WITH ANTENNAS UP TO 4 FT. INCLUDES STAINLES STEAL MOUNT AND 18 FT FIRE-FLEX, FIRE RING COAX WITH SO-239 SCREW ON TYPE STUD
SKU Number:MK-294R
|
|
|
|
|
|
|
FIRESTIK MODEL-134A
Firestik Model SS-134A Stainless Steel flat mount Clamps on flat mirror arms or rails For Firestik antennas up to 4 feet long
SKU Number:SS-134A
|
|
|
|
|
|
|
FIRESTIK MODEL K-74
FIRESTIK MODEL:K-74 TRUNK LIP MOUNT NO HOLE FOR ANTENNAS UP TO 3 FEET IN LENGTH ALL MOUNTING HARDWARE INCLUDED
SKU Number:K-74
|
|
|
|
|
|
|
FIRESTIK SS-124A
These mounts are our most popular stainless steel mounts for flat surface applications. Applications are, for the most part,
limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket
itself is about 4" (102mm) long by 1" (25mm) wide. The supplied stainless steel mounting bolt is a hefty 3/8"-24 x 1" long and
includes a stainless steel nut and washers. This mount may be used with antennas up to 4' (1.2m) long. The SS-124 mount is
complete with our K-4 antenna stud while the SS-124A includes the screw-on style K-4A stud. Both mounts are also
available in chrome plated, cold rolled steel
SKU Number:SS-124A
|
|
|
|
|
|
|
FIRESTIK SS-174
The SS-174 is the tallest of these two mounts. Many of the newer Ford and Chevy pick-ups have a deep channel for the
hood. This mount is ideal for those vehicles. Of course, this mount isn't limited to pick-ups. It can be used on just about any
vehicle with a hood and/or trunk. The bracket measures 2.9" (74cm) from the mounting base to the top of the bracket itself.
The height from the mounting base to the first bend is 2.1" (53mm) so it can be used on channels with depths up to 2"
(51mm). This bracket is also available in one of our cable/mount mini-kits.
SKU Number:SS-174
|
|
|
|
|
|
|
FIRESTIK SS-184A
The primary use for the SS-184 stainless steel mount is for antenna installation on the new style Dodge Ram and Dakota
pick-ups. When the hood is open, the fender bolt near the firewall is removed (right or left side) and later reused to bolt the
antenna bracket to the under-hood fender lip. All mounting hardware is invisible unless the hood is open. Additional stainless
steel sheet metal screws are supplied if additional strength is determined to be needed. The bracket has a pre-determined
bend and does not interfer with the closing of the hood. The bracket is 2" (51mm) wide by 4.1" (104mm) long. Due to the
close quarters, the stud requires crimp-on coaxial connectors
SKU Number:SS-184A
|
|
|
|
|
|
|
FIRESTIK SS-194A
FIRESTIK SS-194A
Those square holes in the bed rails of full size pick-up trucks are the prefect location for a "no-holes" antenna mount. The flat
upper bracket is 6" (152mm) long and extends out over the bed rail so you may mount your antenna without losing the ability
to mount a camper shell. Includes stud mount, stainless steel brackets and hardware, and a gasket to protect the vehicle finish.
SKU Number:SS-194A
|
|
|
|
|
|
|
FIRESTIK SS-204A
FIRESTIK SS-204A
These mounts were specifically designed to allow antenna installations on vehicles where other mounts may not work. The
primary goal was to offer a mount that could be affixed to a vertical inner door jamb such as that which might be found on the
rear or side door of a cargo type van. Since the mounting screws are meant to be on the inner edge of the jamb, visible holes
in the vehicle body are eliminated. Like many other Firestik mounts, the versatility of these mounts go well beyond their
targeted use. When you hold this mount in your hand you will start to recognize all of the mounting possibilities. Chances are,
you will find several locations to mount it on your vehicle. For antennas up to 4ft in length.
In order to give you many years of trouble free use, the bracket parts and mounting hardware is made of stainless steel. The
bracket is 1.5" (38mm) wide and has a 2" (50mm) reach for mounting inside the door jamb. Overall, the mount is 4.2"
(105mm) long. In order to compensate for the door jamb angles, the stud bracket will swivel a full 180 degrees, 90 in each
direction. This adjustment feature will let you mount the antenna on either the left or right side of the vehicle. We have two
models for you to choose from;
The SS-204 includes our K-4T2 antenna stud mount. Accordingly, it is fully compatible with coax cables that are terminated
with ring terminal connections or those that are unprocessed at the mount end. In case of the later, we do supply all of the
required ring terminals with this mount.
SKU Number:SS-204A
|
|
|
|
|
|
|
FIRESTIK SS-274A
FIRESTIK SS-274A
These mounts were specifically designed for hood, trunk and hatchback applications. However, the versatility of these mounts
allow you to mount it in many ways. Once you have it in your hand you will see the numerous possibilities. All bracket parts
are made of stainless steel. Since the mount is located on the inside channel of your hood, trunk or hatchback, there are no
visible mounting holes. These mounts are fully adjustable to compensate for sloping angles such as those common on mini-van
hoods and/or hatchback doors. Both mounts have a full 180 degrees of adjustment and may be mounted on either the left or
right side of the vehicle. For use with antennas up to 4ft in length.
The riser portion of the bracket will accomodate channels that are up to 2 inches (50mm) deep. Overall, the bracket is 4
inches (100mm) tall and 1.5" (38mm) wide. All mounting hardware (also stainless steel) is hidden inside the channel. These
mounts come complete with the antenna mounting stud. Two models are available.
The SS-274 includes our K-4T2 antenna stud mount. Accordingly, it is fully compatible with coax cables that are terminated
with ring terminal connections or those that are unprocessed at the mount end. In case of the later, we do supply all of the
required ring terminals with this mount.
SKU Number:SS-274A
|
|
|
|
|
|
|
FIRESTIK SS-294A
FIRESTIK SS-294A
This stainless steel mount locks into any of the stake hole pockets along the edge of a pick-up truck bed. There is no need to
drill any holes in the vehicle. Since there isn't any angular adjustment, the bed rail needs to be horizontal to prevent the antenna
from leaning inward or outward. The mount can be used on bed rails with protective covers (such as those on the newer Ford
Super-Duty trucks). Because of the stud mount configuration on this mount, it can only be used on trucks where there is inside
access to the stake hole pocket (from side or bottom) for the coaxial cable to be routed to the mount. In some cases, this
might require that the coax be routed through an opening that is too small for a PL-259 connector to pass. In those cases, the
PL-259 will need to be installed after the coax has been routed. The mount will easily support heavy-duty antennas up to 4
feet (1.2m) in length.
SKU Number:SS-294A
|
|
|
|
|
|
|
FIRESTIK SS-64AGM
This stainless steel mount was specifically designed for use on late model General Motors sport style mirrors. These mirrors
are recognized by the short tubular mirror support coming out of the door bracket, bending 90 degrees and connecting to the
mirror. The universal design allows this mount to be used on either the left or right side of the vehicle. To compliment the
bracket material, the mounting hardware is also stainless steel. To assure you that you only have the best, we pre-instaled our
famous K-4A antenna mounting stud. Recommended for antennas up to 3ft (92cm)
SKU Number:SS-64AGM
|
|
|
|
|
|
|
FIRESTIK WTP-4A
FIRESTIK WTP-4A
The mounting stud sits on a steel plate which is adjustable parallel to the mounting plane. The WTP series works great on
metal rain gutters, upper edges of trunks and hatchbacks and also on the top edge of bumpers. Hardware and mounting stud
included.
SKU Number:WTP-4A
|
|
|
|
|
|
|
V-BAR MOUNT TO MAKE RABBIT EARS
V-BAR MOUNT TO MAKE RABBIT EARS INSTALL ON ANY SINGLE OR COFASE MOUNT
TRUNK , ROOF, MIRROR, OR BUMPER, WITH 3/8X 24 THREAD HOLE. V-BAR IS
SCIENTIFACLY ANGLED SO WHEN USED WITH 2 'FIRESTIKS ' YOUR AUDIO
TOANOTHER STATION INCREASES UP TO 40% AND YOUR RECIVE WILL INCREASE
UP TO 25%
SKU Number:V-BAR
|
|
|
|
